***FREE MAINLAND DELIVERY***

EASYGrout is a high-quality slurry grout for use on porcelain and most other paving materials.

EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking. It is available in three colours and is suitable for grouting joints internally and externally around ceramic, porcelain and natural stone tiling and clay paving slabs, filling joints from 5mm up to 25mm wide with a minimum joint depth of 20mm.

Available in 15kg tubs and also packed in 3 x 5kg bags for more economic mixing - less waste.

COVERAGE:

The coverage of EASYGrout depends primarily upon the tile / slab dimensions and the joint width and depth.

The following table gives a rough guide as to what level of coverage can be achieved with 15kg of EASYGrout when used with the tile and joint dimension shown below:

Length mm     Width mm     Depth mm        Joint            Area covered
                                                                  width mm          per 15kg

_______________________________________________________

300                    300                20                   6                       9.3

300                    400                25                  10                      5.1

600                    600                20                   5                       21.75

450                    450                25                  10                      6.75

FEATURES & BENEFITS:

• Exterior and interior use
• Less waste with 3 separate 5kg bags inside the tub
• Easy to mix and apply.  A slurry grout which fills all joints without the compact
• Smooth finish
• Available in 3 colours: Natural, light grey and dark grey